ARDUPILOT FLIGHT STACK
Navio runs well proven Ardupilot flight stack and can operate in different flight modes including manual, stabilize, follow-me and auto. Code is executed directly on Raspberry Pi with real-time Linux kernel and you can run your applications alongside. Copter, Plane and Rover are supported.
Ardupilot supports MAVLink communication with a wide variety of GCS choices for Win, Mac, Linux, as well as for Android and IOS. Navio will send telemetry over Wi-Fi, LTE, BT or any other modem. With remote login you can monitor system, execute commands and run scripts in flight.
Use LTE modem or high power Wi-Fi to make your drone accessible over the internet or on your local network. Stream video from Raspberry Pi camera, use joystick to control your drone from anywhere in the world. Navio is a multimedia autopilot and we can’t wait to see what you are able to do with it.
RESEARCH AND EDUCATION PLATFORM
Navio is more than a ready to fly autopilot – it was built for research and education and has proven itself in universities and research institutions worldwide. Just think of numerous projects that can get use of IMU, GPS, barometer, servo control and very friendly programming environment. Open-source drivers and detailed tutorials are available both in C++ and Python. All experimental data can be processed directly on Raspberry Pi.
BUILT-IN GNSS RECEIVERGPS, GLONASS and Beidou satellite systems are supported. External antenna port is available for flexible antenna choice.
RC IO co-processorAccepts PPM, SBUS input and provides 14 PWM output channels with variable frequencies.
Two IMU chips provide unmatched flight performance and redundancy.
Extension portsDF13 ports with ADC, I2C and UART interfaces are available for connection of sensors and radios.
High resolution baroTop notch barometer provides altitude sensing with 10 cm resolution.
Advanced circuitryTriple redundant power supplyPower module port with overvoltage protection and sensing of voltage and current.
- MPU9250 9DOF IMU
- LSM9DS1 9DOF IMU
- MS5611 Barometer
- U-blox M8N Glonass/GPS/Beidou
- RC I/O co-processor
- HAT EEPROM
- RGB LED
- 14 PWM servo outputs
- PPM/S.Bus input
- Triple redundant power supply
- Power module connector
- UART, I2C, ADC for extensions
- Size: 55x65mm
- Weight: 23gr